Photoemission, photovoltaic and photoconductive devices, Einstein’s equation, threshold wavelength, current–voltage trends, solved numericals and BPSC-style practice in one study guide.
What is a photoelectric cell?
A photoelectric cell or photocell is a device that detects light or converts incident light into an electrical change or useful electrical output. In elementary competitive-exam questions, the expected function is usually conversion of light energy into electrical energy. However, real photocells include several devices whose internal mechanisms are not identical.
A photoemissive cell ejects electrons from a photosensitive surface when photons exceed a threshold energy. A photovoltaic cell produces an electromotive force from illumination of a semiconductor junction. A photoconductive detector changes electrical conductivity under illumination, typically requiring an external supply to read an electrical signal. Grouping all three under the term ‘photoelectric cell’ is common in school-level texts but can hide important distinctions.
Understanding the difference prevents an error in the older CrackTarget article that treated solar-panel photovoltaic action as literally the same experiment as Einstein’s external emission of electrons from a metal into vacuum.
What is the photoelectric effect?
The classical external photoelectric effect occurs when light of sufficiently high frequency strikes a suitable surface and causes electrons to escape from it. The released electrons are called photoelectrons. It is an important demonstration of the photon aspect of electromagnetic radiation.
Light supplies energy in discrete packets called photons. The energy of one photon is proportional to frequency: E = hf, where h is Planck’s constant and f is frequency. For a metal surface, the photon must supply at least the work function, the minimum energy required for an electron to escape. Any remaining energy can appear as the emitted electron’s kinetic energy.
This interpretation explains why arbitrarily bright light of too low a frequency cannot eject photoelectrons. Increasing brightness raises the number of low-energy photons; it does not turn each photon into a higher-energy packet.
Einstein’s equation and its meaning
The equation is an application of energy conservation. If the photon energy is below the work function, no external photoelectrons are emitted in the idealised one-photon model. If the energy exceeds it, the maximum electron kinetic energy is the difference. Different electrons can emerge with lower kinetic energies due to their initial energy states and interactions before escape.
When the incident frequency increases while intensity and material are suitably controlled, the maximum emitted-electron kinetic energy increases. Changing the light intensity mainly affects the number of emitted electrons and thus the photocurrent, assuming the frequency is above threshold and other conditions are comparable.
Work function, threshold frequency and wavelength
The work function (φ) measures the minimum energy needed to release an electron from a surface. It depends on the material and its surface condition. The threshold frequency (f0) is the minimum incident-light frequency for photoemission: f0 = φ/h.
Because wavelength and frequency obey c = fλ, the maximum wavelength that can cause external emission is λ0 = hc/φ. Light with wavelength longer than this threshold has insufficient energy. Shorter wavelengths correspond to higher frequencies and higher photon energy.
Constants and useful unit conversions
| Quantity | Usual numerical value | Units |
|---|---|---|
| Planck constant, h | 6.626 × 10−34 | J s |
| Speed of light, c | 3.00 × 108 | m/s |
| Elementary charge, e | 1.602 × 10−19 | C |
| 1 electronvolt | 1.602 × 10−19 | J |
| Convenient photon relation | E (eV) ≈ 1240 / λ (nm) | eV when λ is in nm |
An electronvolt (eV) is a unit of energy, not an electrical current or a potential difference. One electronvolt is the energy acquired by a particle with one elementary charge passing through a potential difference of one volt. It is especially convenient in atomic and modern physics.
Stopping potential and saturation current
In a typical photoelectric experiment, a photosensitive cathode is illuminated and a second electrode collects emitted electrons. Applying a potential that assists their motion increases the measured current until nearly all emitted electrons are collected; this maximum is the saturation photocurrent.
When a retarding potential is applied, the current decreases. The minimum retarding potential magnitude required to stop even the most energetic emitted electrons is the stopping potential Vs. Its magnitude obeys eVs = Kmax, where e is the magnitude of the electron charge.
Increasing light intensity at fixed above-threshold frequency generally raises the saturation photocurrent but does not change the ideal stopping potential. Raising the frequency increases maximum kinetic energy and therefore the stopping-potential magnitude. The actual experiment must account for material properties, contact potentials and non-ideal surface conditions.
Intensity versus frequency: most tested distinction
| Change | Typical effect when emission occurs | What does not follow automatically |
|---|---|---|
| Increase intensity, keep frequency fixed | More incident photons per second; higher emission rate and photocurrent | Maximum photoelectron energy need not rise |
| Increase frequency, keep material fixed | Higher energy per photon; larger Kmax | Intensity or current does not necessarily rise |
| Use frequency below threshold | No ordinary external photoemission | Higher intensity cannot compensate for low photon energy in the simple model |
| Use different metal | Changes work function and threshold | Identical light need not cause identical emission |
These predictions challenged a simplistic classical-wave account in which absorbed energy was expected to build up with illumination strength. Einstein’s photon explanation matches the observed cut-off frequency and direct relationship between photon frequency and emitted-electron energy.
Three kinds of light-sensitive cells
Photoemissive cells use light-triggered electron emission from a photosensitive surface, often in evacuated or gas-filled devices. Photoconductive cells change their conductivity when light creates additional mobile charge carriers inside a semiconductor; a light-dependent resistor is a familiar example. Photovoltaic cells generate a voltage under illumination, especially at a p–n junction or related semiconductor structure.
A photodiode responds to incident light by generating charge carriers and a photocurrent, commonly under reverse bias in sensing circuits. A solar photovoltaic cell is engineered to generate electrical power from sunlight. These are related applications of photon–matter interactions but not interchangeable with an evacuated photoemissive tube.
In a multiple-choice exam with broad wording, ‘converts light energy into electrical energy’ is the expected answer; advanced questions may require classification by physical mechanism.
Photovoltaic effect versus external photoemission
In a solar cell, absorbed photons create electron–hole pairs within a semiconductor, and an internal junction field helps separate carriers so electrical power can be delivered to a circuit. Electrons do not have to fly out of the semiconductor into vacuum. This is an internal photovoltaic process.
In external photoemission, electrons actually escape a surface; a collection electrode and external circuit can measure their motion. The work-function threshold equation is central to the ideal metal photoemission experiment. Semiconductor photovoltaics also have photon-energy requirements related to band structure, but their operation is described using semiconductor band gaps, carrier generation and junction physics rather than simply substituting the metal work function.
Solar panels therefore illustrate light-to-electric conversion, but teaching them as identical to Einstein’s photoelectric tube without qualification is imprecise.
Photoelectric cell applications
Light-dependent detectors are used in automatic switching, light meters, object counting, optical communication, smoke-alarm technologies, light curtains, industrial positioning and laboratory experiments. The exact sensor varies: a photodiode may favour quick response, a phototransistor can amplify light-generated effects, and a photovoltaic array produces usable energy rather than merely an information signal.
Automatic lighting systems detect ambient brightness and control a separate electrical circuit. Security gates can detect when a beam is interrupted. Photovoltaic panels convert solar radiation into direct-current electricity, which may then be converted by inverters, consumed immediately or stored in batteries when an appropriate storage system exists.
A photoelectric cell does not inherently ‘store light energy’. Storage requires a separate mechanism such as a battery or capacitor. An LED works in the opposite direction: it converts electrical energy into emitted light.
Worked numerical 1: photon energy and kinetic energy
Question: Light of wavelength 400 nm strikes a metal whose work function is 2.0 eV. Find the maximum photoelectron kinetic energy, assuming ordinary one-photon photoemission.
Step 1: Photon energy = 1240/400 = 3.10 eV. Step 2: Kmax = 3.10 − 2.00 = 1.10 eV. Step 3: The magnitude of the stopping potential is 1.10 V because eVs equals that electron kinetic energy.
If intensity increases while wavelength remains 400 nm and the emitting surface is unchanged, the ideal maximum kinetic energy stays at 1.10 eV; more electrons may be released per unit time.
Worked numerical 2: threshold wavelength
Question: The work function of a metal is 2.5 eV. What is its threshold wavelength?
Use λ0 ≈ 1240/φ = 1240/2.5 = 496 nm. A 600-nm photon has lower energy than a 496-nm photon and therefore cannot cause ordinary external emission from this metal in the ideal model. A 400-nm photon has higher energy and can cause emission.
Numerical conversions are often easier if energy is expressed in eV and wavelength in nanometres. Always confirm that the problem gives a work function rather than a semiconductor band gap, because the interpretation depends on the device.
Worked numerical 3: stopping voltage and Planck constant
Question: A photoelectron has a maximum kinetic energy of 3.0 eV. What is the stopping-potential magnitude? Answer: 3.0 V, since 1 eV corresponds to the energy change for one electron across 1 V.
If one plots Kmax on the vertical axis against incident frequency f on the horizontal axis, the photoelectric equation predicts a straight line with slope h and intercept −φ when axes use compatible energy units. The frequency intercept is f0 = φ/h. This is a standard method for experimentally examining the law.
Who discovered and explained the effect?
Experiments associated with Heinrich Hertz in the late nineteenth century and subsequent investigations established the photoelectric phenomenon. Albert Einstein offered the influential photon-based theoretical explanation in 1905. He received the 1921 Nobel Prize in Physics, awarded in 1922, especially for his law of the photoelectric effect.
The exam distinction is important: Einstein should not simply be described as the first person who observed the effect experimentally. His decisive contribution was explaining key observations through energy quanta, developing a foundation for modern quantum physics. Further work, including by Robert Millikan, tested the predicted frequency dependence and established key constants.
The original BPSC 69th photocell question
Question as quoted by CrackTarget: A photoelectric cell is a device which: (A) Converts light energy into electric energy; (B) Converts electric energy into light energy; (C) Stores light energy; (D) None of the above.
Correct answer: (A). Broadly defined photocells can transform incident light into electrical signals or usable electrical output. Option B describes a light-producing device such as an LED; option C incorrectly treats a sensor as an energy-storage system. For a more advanced explanation, distinguish an external photoemissive device from a photovoltaic or photoconductive cell rather than treating their physical mechanisms as identical.
This original examination-style question remains in the updated post, but the previous outdated ’71st BPSC upcoming’ promotional content has been removed.
Rapid revision: errors to avoid
- Photoelectric cell: light input and electrical output or electrical signal.
- Einstein’s equation: Kmax = hf − φ.
- Threshold frequency f0 = φ/h.
- Below-threshold frequency cannot emit electrons merely by increasing intensity in the basic experiment.
- Photon energy rises with frequency and decreases with wavelength.
- Intensity mainly controls photocurrent, not maximum kinetic energy at a fixed frequency.
- Stopping potential magnitude is Kmax/e.
- External photoemission and internal photovoltaic action are related but different.
- Photoelectric cells do not inherently store electricity.
- Einstein explained the effect in 1905 and was awarded the 1921 Nobel Prize in Physics.
25 original practice MCQs
Attempt each question before opening its answer. Previous-year source wording is preserved separately above.
Q1. A photoelectric cell broadly converts:
- Light into electrical output
- Heat into sound only
- Electricity into sunlight
- Stored sound into light
Correct answer and explanation
Answer: A. Light can produce an electrical signal or current.
Q2. Einstein’s maximum photoelectron-energy equation is:
- K=hf+φ
- K=mc² only
- K=φ−hf always
- K=hf−φ
Correct answer and explanation
Answer: D. Photon energy pays the work function before kinetic energy.
Q3. Work function is the:
- Total heat absorbed
- Electron mass
- Minimum surface electron escape energy
- Maximum output power
Correct answer and explanation
Answer: C. The work function is the minimum energy required to eject an electron.
Q4. The threshold frequency is:
- cφ
- φ/h
- h/φ
- φh
Correct answer and explanation
Answer: B. At emission threshold hf0 = φ.
Q5. At fixed above-threshold frequency, intensity increase generally raises:
- Saturation photocurrent
- Maximum photoelectron energy
- Work function
- Threshold frequency
Correct answer and explanation
Answer: A. More photons per unit time can liberate more electrons.
Q6. Increasing incident frequency typically increases:
- Electron charge
- Planck constant
- Metal atomic number
- Maximum kinetic energy
Correct answer and explanation
Answer: D. The maximum photoelectron energy rises with hf.
Q7. If the incident frequency is below threshold, increasing intensity will:
- Increase work function to infinity
- Create photons of higher frequency
- Not produce ordinary photoemission
- Always produce emission
Correct answer and explanation
Answer: C. Low-energy photons remain below the required individual threshold.
Q8. Photoelectric stopping potential measures:
- Metal density
- Maximum kinetic energy per charge
- Optical wavelength directly
- Total number of atoms
Correct answer and explanation
Answer: B. eVs=Kmax.
Q9. Photon energy is proportional to:
- Frequency
- Wavelength
- 1/frequency
- Temperature alone
Correct answer and explanation
Answer: A. E=hf.
Q10. Photon energy is inversely proportional to:
- Frequency
- Planck constant
- Speed of light
- Wavelength
Correct answer and explanation
Answer: D. E=hc/λ.
Q11. Energy of a 400-nm photon is approximately:
- 31 eV
- 310 eV
- 3.1 eV
- 0.31 eV
Correct answer and explanation
Answer: C. 1240/400 = 3.1 eV.
Q12. If φ=2.0 eV and photon energy=3.1 eV, Kmax is:
- 6.2 eV
- 1.1 eV
- 5.1 eV
- 0.65 eV
Correct answer and explanation
Answer: B. Subtract the work function from photon energy.
Q13. If Kmax=1.1 eV, stopping-voltage magnitude is:
- 1.1 V
- 11 V
- 0.11 V
- 1.1 A
Correct answer and explanation
Answer: A. For a single electron, 1 eV corresponds to 1 V stopping potential.
Q14. If work function is 2.5 eV, threshold wavelength is:
- 1240 nm
- 2.5 nm
- 50 nm
- 496 nm
Correct answer and explanation
Answer: D. 1240/2.5=496 nm.
Q15. At wavelengths longer than threshold, external photoemission:
- Requires lower work function automatically
- Increases with wavelength
- Does not occur in simple one-photon model
- Always increases
Correct answer and explanation
Answer: C. Longer wavelength means insufficient individual photon energy.
Q16. Which device primarily converts electricity into light?
- Solar panel
- LED
- Photocell
- Photodiode
Correct answer and explanation
Answer: B. LEDs emit photons using electrical energy.
Q17. Which effect creates voltage in illuminated semiconductor junctions?
- Photovoltaic
- Thermal conduction only
- Chemical combustion
- Nuclear fission
Correct answer and explanation
Answer: A. The photovoltaic effect separates light-generated carriers.
Q18. Photoconductive cells mainly change:
- Material density
- Gravitational pull
- Nuclear mass
- Conductivity under light
Correct answer and explanation
Answer: D. Illumination creates mobile carriers and affects resistance.
Q19. In external photoemission, electrons:
- Become photons only
- Disappear
- Escape a surface
- Must stay in a solar p–n junction
Correct answer and explanation
Answer: C. Photoelectrons leave the illuminated surface.
Q20. Which historical scientist explained photoelectric observations using light quanta?
- Dalton
- Einstein
- Hess
- Wegener
Correct answer and explanation
Answer: B. Einstein introduced his photon-based explanation in 1905.
Q21. Einstein’s Nobel Prize in Physics recognised the year:
- 1921
- 1905
- 1935
- 1945
Correct answer and explanation
Answer: A. The 1921 Nobel Prize was awarded to him and presented in 1922.
Q22. For Kmax versus frequency, ideal plot slope is:
- Electron mass
- Work function
- Intensity
- Planck constant h
Correct answer and explanation
Answer: D. Kmax=hf−φ is linear with slope h.
Q23. The frequency-axis intercept of that graph is:
- Atomic mass
- Stopping current
- Threshold frequency
- Intensity
Correct answer and explanation
Answer: C. Kmax=0 at f0=φ/h.
Q24. A photocell inherently stores solar electrical energy. This is:
- A conservation law
- False
- Always true
- True in all photodiodes
Correct answer and explanation
Answer: B. Storage typically needs a separate battery or device.
Q25. Which statement is most accurate?
- Photovoltaic and external photoemissive cells are different mechanisms
- All photosensors eject electrons into vacuum
- LED is a photocell
- Threshold does not depend on material
Correct answer and explanation
Answer: A. Semiconductor junction carrier separation differs from surface electron ejection.
FAQs
What is a photoelectric cell?
A light-responsive device producing an electrical signal or electrical output. Examples include photoemissive cells, photodiodes and photovoltaic cells.
What is the Einstein photoelectric equation?
Maximum photoelectron kinetic energy Kmax equals photon energy hf minus the work function φ.
How do intensity and frequency differ?
Intensity generally changes photon arrival rate and photocurrent; frequency determines energy per photon and maximum electron kinetic energy.
Is a solar cell the same as an external photoelectric cell?
No. A solar photovoltaic junction produces power through light-generated carriers inside a semiconductor, without requiring electrons to escape into vacuum.
What was Einstein’s Nobel Prize awarded for?
The 1921 Physics Prize especially recognised his law of the photoelectric effect.
Study more General Science on CrackTarget
Strengthen Physics concepts and BPSC previous-year question analysis with connected practice resources.
BPSC 69th solved questionsFree notesExam books and resourcesVerified educational sources
- OpenStax University Physics — Photoelectric effect, formulas, graphs
- OpenStax Physics — Photocells and photovoltaic devices
- NobelPrize.org — Einstein 1921 Physics Prize
- NobelPrize.org — Einstein’s explanation
Physics and history reviewed 21 October 2026. Equations use standard introductory textbook assumptions.
